|
3-Ply Nitrile Rubber Attack/Supply Hose
Snap-tite TPX utilizes a 3-ply design where the ribbed cover and smooth nitrile liner are extruded independently.
 Click here to view Product Information |
|
Extruded Nitrile Rubber Attack/Supply Hose
Snap-tite HFX is a nitrile thru-the-weave, rubber covered fire hose that utilizes both polyester and nylon yarn in the reinforcing jacket.
Click here to view Product Information |
|
Extruded Nitrile Rubber Attack/Supply Hose
Manufactured in similar process as TPX, Snap-tite ATX utilizes a 3-ply design where the cover and liner are extruded independently and double vulcanized to guarantee a consistent, compact hose wall.
Click here to view Product Information |
|
Lightweight Extruded Rubber Hose
Snap-tite LD is a premium quality, nitrile rubber covered fire hose that is manufactured using a unique process which permanently bonds the polyester reinforcement to the nitrile rubber cover/liner.
Click here to view Product Information |
|
Polyester Double Jacket Attack Hose
Snap-tite TE hose is compact and weather, abrasion and crack resistant. Capable of operating pressures up to 225 psi (1550 kPa) (not all sizes), TE is also made of NSF Standard 61 approved materials and can be used for potable water.
Click here to view Product Information
|
|
| National Fire Hose: |
|
Nylon Double Jacket Attack Hose
N-Dura® has an outstanding record of durability and value: 30 years of fire ground experience and millions of feet sold prove that it is one of America’s favorites.
Click here to view Product Information
|
|
Large Diameter Nylon Double Jacket Hose
National Fire Hose Triple Duty gives you a double jacket alternative. The polyurethane liner is lighter than rubber and the nylon outer jacket, treated with our exclusive Dura-Cote™ abrasion resistant encapsulation, provides the durability you need.
Click here to view Product Information |
|
Large Diameter Polyester Double Jacket Hose
Looking for a polyurethane lined, polyester jacketed, all synthetic large diameter hose? National Fire Hose Triple Poly gives you that alternative.
Click here to view Product Information |
|
Nylon Double Jacket Attack Hose
When introduced, Dura-Pak started an industry-wide trend toward lightweight
hi-rise hose.
Click here to view Product Information |
|
Polyester Double Jacket Supply Hose
Our National Fire Hose 8D is a municipal grade double jacket hose with a lightweight EPDM rubber liner that meets all the requirements of NFPA 1961.
Click here to view Product Information |
|
Lightweight Polyester Double Jacket Hose
This double jacket municipal grade fire hose incorporates a lightweight polyurethane liner that meets all the requirements of NFPA 1961.
Click here to view Product Information |
|
Light Duty Polyester Single Jacket Forestry Hose
Quik DrawTM is a small diameter, lightweight, compact single jacket fire hose using standard ¾” brass Garden Hose Thread (GHT) fittings having a working pressure of 150 psi (1030 kPa).
Click here to view Product Information |
|
Polyester Single Jacket Forestry Hose
Snap-tite’s 8F Type187 fire hose is a lightweight, all-synthetic fire hose with a polyurethane lining inside a polyester jacket designed to meet the USDA Forest Service specification 5100-187 for “Synthetic Lined” fire hose.
Click here to view Product Information
|
|
Polyester Double Jacket Hose
Snap-tite type 6D hose is designed almost identically to our type 8D hose but for lower operating pressures at 275 psi (1895 kPa) maximum.
Click here to view Product Information
|
|
Polyester Double Jacket Hose
Type 8M mine hose is a premium quality Neoprene rubber lined, double jacket hose that has been MSHA (Mine Safety & Health Administration) approved for use in any mine.
Click here to view Product Information
|
|
Polyurethane Lined Hose
Snap-tite 8T has the same jacket construction as 8D in that it is made with two jackets of tightly woven polyester but is lined with polyurethane which is lighter and packs tighter than 8D.
Click here to view Product Information |
|
3P - Low Pressure
Polyester Single Jacket Hose
Type 3P is an economical single jacket industrial hose made from high strength polyester along with an EPDM rubber liner.
Click
here to view Product Information
|
|
5P - Medium Pressure
Polyester Single Jacket Hose
Type 5P hose is the perfect medium pressure hose that is tough enough to meet most application requirements while remaining economical for most budgets.
Click
here to view Product Information
|
|
6P - High Pressure
Polyester Single Jacket Hose
Type 6P hose is a higher pressure hose that is tough enough to be used for industrial firefighting. 6P is a polyester single jacket style hose with an EPDM rubber liner that can also handle some chemicals and petroleum based products.
Click
here to view Product Information
|
|
5M - Mine Hose
Polyester Single Jacket Hose
Snap-tite 5M mine hose is a polyester single jacket hose with a Neoprene rubber liner that resists burning inherently better than exclusively hydrocarbon rubber.
Click
here to view Product Information
|
|
| Ponn Hose: |
|
Polyester Double Jacket Attack/Supply Hose
Looking for a hose to flow a tremendous amount of water? You’ve found it with CONQUEST! Today’s fires are hotter and more water is needed at the nozzle to knock them down fast.
Click here to view Product Information |
 |
|
|
